Job SummaryGeneral facility maintenance and repair duties as directed. Pneumatic and direct digital control experience. Knowledge of air conditioning and refrigeration including ice machines. Experienced in troubleshooting and repair of HVAC equipment. Ability to cut and thread pipe to meet base fabrication needs. Maintain and install filter systems. Some knowledge of medical gas systems. Install and maintain circulating pumps. Knowledge of high-pressure steam boilers and delivery systems. Estimate and requisition materials needed for projects. Working knowledge of OSHA, State, DOH and Hospital Safety Standards. Ability to analyze and troubleshoot Electrical controls. Additional electrical experience is helpful. Experienced in all forms of soldering. Ability to understand and complete preventative maintenance programs. Be able to perform heavy lifting and climbing. Ability to perform snow removal duties including shoveling salting and working knowledge of snow plow operations. Strong self-motivation is expected.Core Job Responsibilities55% Work order response: but not limited to area temperature problems throughout the Facility. Replacing/repairing pump and circulators. Repairing and charging refrigerant systems. Adding or moving equipment for construction projects. 25% Preventive maintenance duties: Typical but not limited to filter changes, coil cleaning, and belt changes. Ice machine cleaning and service. 10% Compliance with regulatory responsibilities: Ensure appropriate function is maintained to comply with various regulatory agencies. Refrigerant reclaiming, and Fire barrier repair. 10% Quality Improvement: to look for ways to improve the patient/visitor experience. Update heating and cooling systems. Modifying or move HVAC components or sensors for improve comfort. Education/Experience RequirementsRequired:High School or equivalent,5 years of HVAC ExperiencePreferred:Associates or higher degree3-5 years of Healthcare Facilities or Trade Experience Licensure/Certification RequirementsRequired:Universal Refrigerant Reclaiming licenseDisclaimerQualified applicants will receive consideration for employment without regard to their age, race, religion, national origin, ethnicity, age, gender (including pregnancy, childbirth, et al), sexual orientation, gender identity or expression, protected veteran status, or disability.Successful candidates might be required to undergo a background verification with an external vendor.Job DetailsReq Id 89077Department ENGINEERINGShift DaysShift Hours Worked 7.50FTE 0.94Work Schedule UFCSMEmployee Status A1 - Full-TimeUnion 2006 - UFCWPay Range $21 - $27 Hourly#GP01

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Fleet Mechanics start at $28.00 – $33.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $2,500 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referral.Strong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMMain Ingredients of the job:Troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list, and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years of verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both. Reefer experience preferred.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering an appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified, preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Reefer experience.Must be able to read and communicate in the English language such as to attend trainings, hold conversations, receive safety and job-related coaching, read and understand technical and service manuals.Able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.The following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $28-33.00 per hour. This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Please note, this position is located at Sugarbush Resort in Warren, VT Year RoundRESORT OVERVIEW:Sugarbush Resort is a year-round destination offering some of the best skiing and riding in the east, an award-winning ski school, mountain biking, golf, disc golf, an array of dining venues, and a fully appointed Health and Recreation Center. Do you want to join an all-star team dedicated to delivering an unparalleled guest experience Make this your best season yet by joining the team at Sugarbush and taking advantage of everything Vermont has to offer. BESIDES GETTING PAID TO WORK AT AN INCREDIBLE RESORT, WHAT'S IN IT FOR YOU Free skiing + riding privileges at Sugarbush and across the family of Alterra Mountain Company resorts for all eligible employees and their dependentsDiscounted rates at non-Alterra-owned Ikon Pass destinationsFree golf and health & recreation center membership for eligible employees and their dependentsVacation and sick time for eligible employees to rest, relax and rechargeGenerous discounts on food & beverage, apparel, and outdoor gearMedical, dental, vision, life, AD&D, short term & long-term disability insurance, EAP, HSAs, FSAs, and more401(k) plan with generous company matchPaid parental leave of up to 6 weeks for eligible employeesEmployee housing (subject to availability)POSITION SUMMARY:Sugarbush Resort is seeking Level 3 Lift Maintenance Technicians to join our Mountain Operations team. Lift Maintenance Mechanics ensure the safety and reliability of our lifts by monitoring, maintaining and repairing lift equipment in accordance with all applicable rules and regulations. The ideal candidate holds a competent mechanical/electrical skill set and demonstrates an ability to positively work as part of a larger team. **There is a $2000 sign-on bonus, split and paid out $1000 after 6 months of work and $1000 after 12 months of work.**RESPONSIBILITIES: Maintain and repair all lift equipment, ranging from conveyors to high-speed detachable quads. Duties during the winter operating season include regularly scheduled maintenance, pre-operational, mid-day, weekly, and monthly inspections as well as responding to lift breakdowns. The summer season includes a thorough inspection of all lift components, tower work, and grip and chair maintenance. Work on hydraulic systems, braking systems, rigging, gasoline and diesel engines up to 900 Hp, as well as low voltage safety circuits. QUALIFICATIONS:High school diploma or equivalent. Minimum two years of mechanical or electrical experience. Detachable lift experience is a plus. Must be able to work under timelines and pressure. Must be able and willing to work independently as well as part of a larger team. Adherence to all safety policies and procedures is a must. This job requires the ability to climb and work at substantial heights and in all kinds of weather. Must be able to lift and carry loads up to 100 pounds. Valid driver's license necessary. Requires working on weekends and holidays. Must recognize and adhere to safety concerns and established protocol.Sugarbush Resort is an Equal Opportunity Employer.An offer of employment may be contingent upon the results of a background, MVR, or criminal records check.

If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPPmay be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits. Position is eligible for $1,000.00 Sign on Bonus,5% bonus plan. ($25-$35.00 per hour), 2nd Shift Differential $2.00 Maintenance Mechanic -Performs all required duties relating to installing and troubleshooting plant production equipment. This is a 2nd shift position working Monday through Friday Overtime as needed. Major Responsibilities: Responsible for ordering and maintaining supplies to support all maintenance functions.Responsible for basic maintenance support for startup operations such as, lights, dust collectors, air filtration systems, etc.Monitor machines or equipment to detect malfunction and discusses machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine.Dismantles defective machines and equipment and installs new or repaired parts.Lays out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaceDesign, assemble and install electronic control systems for production machinery and associated automated equipment’s gauges, valves, pressure regulators, and related equipment.Troubleshoot, maintain and repair machine level control systems, which utilize programmable logic controllers.Repairs and maintains physical structure of establishment.Responsible for adherence to all safety policies, practices and procedures. Requirements: Education: Associate's degree (A. A.) or equivalent from two-year College or technical school; orrelated experience and/or training; or equivalent combination of education and experience.Experienced Forklift drivers preferred. Benefits: CPP-Syracuse offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations. Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Calls Please. Disclaimer:The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. Additional duties and responsibilities may be required of the job holder based upon business needs and at the request of CPP Management. It is the policy of CPP tocooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANSThis is a non-management positionThis is a full time position

Start Your Career as a Maintenance Tech with a $1500 Retention Bonus! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $20.00-$24.00/Hr.Up to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC6263 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Job DescriptionBuild your best future with the Johnson Controls Team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer: · Competitive salary · Paid vacation/holidays/sick time · Comprehensive benefits package including 401K, medical, dental, and vision care · On the job/cross training opportunities · Encouraging and collaborative team environment · Dedication to safety through our Zero Harm policy · Check us out: A Day in a Life at Johnson ControlsWhat you will doThis is a remote position but will require regular travel within the Albany, NY territory. · You will represent one of the leading brands in the HVAC distribution channel for York Factory Direct promoting the JCI portfolio in the assigned market. You will also become a member of a highly motivated, winning team fostering an inclusive and positive culture.· You will be responsible for selling Residential and Commercial HVAC equipment, parts and supplies to HVAC contractors.· The selected candidate will develop partnerships with existing customers to increase share of wallet, while recruiting new customers into the York family to increase market share. You will represent a company proud to design, assemble and manufacture HVAC products in the USA..· Leadership coaching will be a constant throughout your career. Investing in our people is a high priority at JCI. Your sales leaders will onboard you with all the programs, product and company information you need to succeed.· They will always be available to help answer questions and mentor you where they see fit or where improvements can be met. This is designed to make you the best sales professional in the industry so you can achieve all of your personal and professional goals!How you will do it:· Build relationships with existing customers while expanding growth year-over-year.· Discuss all the products and programs York Factory Direct offers to gain more share of wallet.· Teach and coach customers to utilize all program features available to grow their business; the more they sell, the more we sell!· Prospect and recruit customers who fit the York partnership profile. Prove “Why York” is an industry leader with the power behind it to grow their business.· Create custom marketing strategies to help your customers grow.· As needed, you will receive support from our market leaders and a marketing manager.· Assist your customer to select the best York products to meet their client’s needs.· This includes coaching them on their selling approach, product specifications/performance and application regulations which may vary by job.· Negotiate prices and terms of sale.· Ensure customers participate and attend our industry-leading training classes offered locally and virtually.· Our local service managers are best-in-class providing your customer a great resource to improve their quality in the field and increase consumer confidence as they build their business.· Perform to plan.· Set weekly, monthly, quarterly and annual sales goals for overall sales, sales calls, product mix/segmentation, new dealer registrations, training, as well as many other sales metrics.What we look for:· Bachelor’s Degree or an equivalent combination of education and experience.· HVAC industry experience (required)· Minimum 3+ years of direct outside sales experience.· Must be able to use Microsoft Office and Salesforce.com.· Travel required to each customer within aligned market.· Self-motivated individuals with a high energy level and desire to achieve goals beyond what is required.· The right fit is driven to become #1 in the region and across the entire company!· High-performing sales individuals with an understanding of the sales process/cycle and knowledge of principles and methods for showing, promoting, and selling products or services. Anyone can sell a box, what separates you from the competition · Ability to utilize sales process to uncover customer objections/concerns and determine appropriate solutions, while maintaining a plan of action until desired results are achieved.· Understand the principles and processes for providing best-in-class customer service.· Know what a customer needs before they ask.· Exceed customer expectations with your level of service, knowledge and response time.· Customer satisfaction is key to your success.· Ability to listen, gain trust and bring to closure an action, project, resolution, or sale with customers.· Business acumen including sales forecasting, opportunity management and customer planning.· Ability to understand and communicate in today’s technologically driven business environment.

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform maintenance and repairs on mobile equipment such as loaders, haul trucks, and excavators.Diagnose and troubleshoot mechanical and electrical issues.Conduct regular inspections to ensure equipment is operating safely and efficiently.Maintain accurate records of services and repairs.Collaborate with team members to ensure timely completion of tasks.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency with diagnostic tools and equipment.Ability to read and interpret technical manuals and schematics.Excellent communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license and have a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$ 25.00 - 30.00 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Fleet Mechanics start at $28.00 – $33.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $2,500 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referral.Strong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMMain Ingredients of the job:Troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list, and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years of verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both. Reefer experience preferred.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering an appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified, preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Reefer experience.Must be able to read and communicate in the English language such as to attend trainings, hold conversations, receive safety and job-related coaching, read and understand technical and service manuals.Able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.The following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $28-33.00 per hour. This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

TIG Welder If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! CPP Syracuse is looking for a full time Welder for our facility on 1st shift to join our team! $1,000 sign-on bonus for eligible candidates, 5% Bonus program. Hourly rate $27-30 per hourdepending on experiencePrimary Purpose Perform all required duties relating to Gas Tungsten Arc welding (GTAW) of investment castings. CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENTMajor Responsibilities Ability to weld by method of GTAW for rework, repair and cosmetic upgrade in accordance with customer specifications and internal procedures. Candidate is progressing towards welding certification for all alloys. Evaluate castings to ensure preparation from prior operation is adequate.Assess the condition of the castings to determine weld technique.Perform additional weld preparation with the use of die and belt grinders.Operate and maintain welding machines and equipment.Ability to document weld locations and dimensions. Identify and implement improvement opportunities through the use of lean tools such as Systematic Problem Solving, Process Management, Value Stream Mapping, etc.Responsible for adherence to all safety policies, practices and procedures.Ability to work overtimeAttendance/ReliabilityAbility to work at the Chittenango facility Minimum Qualifications and Experience Education: High School Diploma or General Education Degree (GED)Experience: Formal training or classes a plus.Certifications/Licenses: Maintain welding certification for GTAW Other Required Knowledge, Skills & Abilities: LANGUAGE SKILLS - Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, simple drawings, procedure manuals and Internal Method Sheets (IMS). Ability to speak effectively and interact with other team members, engineers and leadership. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to deal with problems involving several concrete variables in standardized situations. REASONING ABILITY - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Must be able to lift up to 50 lbs with or without reasonable accommodations.Some positions require vision screening with or without corrective lenses. Working Conditions The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling.Welding requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://www.cppcorp.com/ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management positionThis is a full time position

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform maintenance and repairs on mobile equipment such as loaders, haul trucks, and excavators.Diagnose and troubleshoot mechanical and electrical issues.Conduct regular inspections to ensure equipment is operating safely and efficiently.Maintain accurate records of services and repairs.Collaborate with team members to ensure timely completion of tasks.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency with diagnostic tools and equipment.Ability to read and interpret technical manuals and schematics.Excellent communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license and have a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$ 25.00 - 30.00 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Fleet Mechanics start at $28.00 – $33.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $2,500 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referral.Strong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMMain Ingredients of the job:Troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list, and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years of verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both. Reefer experience preferred.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering an appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified, preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Reefer experience.Must be able to read and communicate in the English language such as to attend trainings, hold conversations, receive safety and job-related coaching, read and understand technical and service manuals.Able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.The following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $28-33.00 per hour. This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Consolidated Precision Products (CPP), an aerospace and defense manufacturing company, has an immediate need for a CNC Programmer to join our team! This is a 1st shift position at our plant in Chittenango, NY. This position is responsible for programming computer numerical control (CNC) machines to produce parts in accordance with detailed engineering drawings, customer and ISO Certifications. Blue-print reading experience is preferred in this position. The CNC Programmer will work with other CNC Machinists to effectively set up, run, program, and trouble shoot new and existing parts and production lots, as well as successfully detect malfunctions in machine operations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Position starts at $32.00 - $40.00 JOB SUMMARY This position performs machine setups and manufactures machined parts and develops programs for computer based numerically (CNC) controlled machine shop equipment to perform standard metal cutting to meet customer requirements. ESSENTIAL JOB FUNCTIONS/DUTIES Demonstrated ability to understand and work with advanced “shop” mathematical concepts.High level of experience of all aspects of machine manufacturing. i.e.: 3, 4, 5 axis machines, material types, tooling, fixtures, fixture design, part holding techniques, and advanced CNC programming.Excellent analytical and problem solving and resolution capability.Enthusiasm, drive, and work ethic in an ‘on-time’ environment.Ability to work with management, others within engineering, purchasing, and shop floor staff to complete estimates, provide feedback to improve processes, and resolve manufacturing issues.Demonstrates a solid understanding of 3D modeling software.Has the ability to create training materials and train shop floor employees.Possesses creative thinking skills and is a detail-oriented personality.Is able to communicate well to other members of the development team.Eliminate waste and elevates productivity using Lean Manufacturing program.Participate in the startup of new equipment.Ability to cooperate; work effectively and professionally with all levels in the organization, both internal and external customers.Adhere to AS9100 and ISO procedures and complianceEnsures all equipment controls are accurately defined and maintained.Contributes to team effort by accomplishing related results as needed.Responsible for adherence to all safety policies, practices and procedures.Ability to work flexible hours and demonstrate reliability.Ability to work at Chittenango facility. QUALIFICATIONS Education: High School or GED Diploma required - Associates Degree or Certification in related field preferred.Experience: 3-5 years of experience with CNC Programming, and operation of CNC machines.Knowledge of 3D modeling software and Gcode a must.Familiar with Motion Control and Vision.Decision Making and Problem Solving: Able to take action in solving problems with exhibiting judgment and a realistic understanding of issues.Experience and skill in troubleshooting control systems.Knowledge of GD&T practicesExperienced in interpretation of technical drawingsExperience with Coordinate Measurement Machine programming a plus CPP-Syracuse offers its employees a competitive compensation package which includes medical/dental/vision, Employer subsidized 401K, and life insurance. Check us out at www.cppcorp.com to learn more about our products and CPP Corporation. CPP-Syracuse is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. No Phone Call Please. This is a non-management positionThis is a full time position

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform maintenance and repairs on mobile equipment such as loaders, haul trucks, and excavators.Diagnose and troubleshoot mechanical and electrical issues.Conduct regular inspections to ensure equipment is operating safely and efficiently.Maintain accurate records of services and repairs.Collaborate with team members to ensure timely completion of tasks.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency with diagnostic tools and equipment.Ability to read and interpret technical manuals and schematics.Excellent communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license and have a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$ 25.00 - 30.00 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Fleet Mechanics start at $28.00 – $33.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $2,500 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referral.Strong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMMain Ingredients of the job:Troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list, and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years of verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both. Reefer experience preferred.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering an appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified, preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Reefer experience.Must be able to read and communicate in the English language such as to attend trainings, hold conversations, receive safety and job-related coaching, read and understand technical and service manuals.Able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.The following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $28-33.00 per hour. This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform maintenance and repairs on mobile equipment such as loaders, haul trucks, and excavators.Diagnose and troubleshoot mechanical and electrical issues.Conduct regular inspections to ensure equipment is operating safely and efficiently.Maintain accurate records of services and repairs.Collaborate with team members to ensure timely completion of tasks.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency with diagnostic tools and equipment.Ability to read and interpret technical manuals and schematics.Excellent communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license and have a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$ 25.00 - 30.00 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Fleet Mechanics start at $28.00 – $33.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $2,500 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referral.Strong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMMain Ingredients of the job:Troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list, and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years of verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both. Reefer experience preferred.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering an appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified, preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Reefer experience.Must be able to read and communicate in the English language such as to attend trainings, hold conversations, receive safety and job-related coaching, read and understand technical and service manuals.Able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.The following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $28-33.00 per hour. This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Join Our Community of Food People!Ready to build a career with a company that’s leading the food service industry We Help You Make It!Our Fleet Mechanics start at $28.00 – $33.00/hour depending on experience!401K with 2% automatic company contribution plus company match up to an additional 6%.Medical Benefits Start Day One!We offer weekly pay, low-cost Medical, Dental, and Vision for Family Coverage. $2,500 Retention bonus!Paid vacation time, sick, and personal time.Employee uniforms provided.$125 Quarterly tool allowance. $500.00 annually.Employee referral program. $1,000 per referral.Strong Safety Culture, newer equipment, and excellent local leadership.Schedule:Sunday - Thursday Nights4:00 PM - 12:30 AMMain Ingredients of the job:Troubleshoot, diagnose, rebuild, replace, and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.).Perform preventative maintenance within company standards.Complete documentation of all repair orders, PM list, and parts accountability.Handle road service calls; perform road rescue/transport equipment as needed.Keep track of assigned repairs by logging in and out of the Shop Fax system.Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines.Maintain inventory and proper recordkeeping.Backup to other maintenance shop personnel.Willingness and capacity to assume increased responsibility and certifications.Performs other duties as assigned.Must have (3) years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic or reefer mechanic or a combination of both; or (2) years of verifiable hands-on experience with either Diesel Mechanic Certification or TK/Carrier Refrigeration Certification or both. Reefer experience preferred.Diagnostic and troubleshooting competency relating to equipment repairs.Successfully demonstrated independent analytical and problem-solving skills.Prior experience in administering an appropriate PM program.Must furnish own personal hand tools.CDL A and DOT certified, preferred.Knowledge/Skills/Abilities:Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet.Reefer experience.Must be able to read and communicate in the English language such as to attend trainings, hold conversations, receive safety and job-related coaching, read and understand technical and service manuals.Able to communicate with co-workers and drivers with demonstrated teamwork skills.Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision.Ability to adapt to changing organizational and operational needs.Computer and software experience.Ability to work a flexible schedule including nights and weekends.Must be able to work overtime when needed.The following information is provided in accordance with certain state and local laws. Compensation depends on experience, geographic locations, and other factors permitted by law. In New York, the expected compensation for this role is $28-33.00 per hour. This role is also eligible for overtime compensation. Benefits for this role include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.